Minimum consignment of goods: pcs
Multiplicity of a consignment of goods: pcs
Select the quantity corresponding to the minimum batch or
←
BUR-1007 Burner (c/w 1P and 2P nozzles)
Part number:
121107-00067
Copyed at buffer
About this item (PDF)
The BUR-1007 burner is used during installation of closures on telecommunication and electrical cables, for soldering at melting point up to 700 °C and for HST tube shrinking. Propane-butane is used as combustible gas.
The burner consists of a body with the fastened control valve to adjust the gas flow and changeable nozzle screwed onto it. The gas is fed through the nipple to the control valve, then the gas flows through the nozzle injector into the mixer to form a combustible mixture fed to the nozzle. Due to the nozzle design features, a flame torch of a specified shape is created at the nozzle outlet.
The soldering nozzle No. 1P creates a stable, conical flame and serves for soldering at the melting point of up to 700 °C. The area of the mixer holes can be adjusted by a flap in the shape of a cylindrical spring attached to the mixer to regulate the flame ratio. The damper travels up and down the mixer when the spring ends are compressed.
The nozzle No. 2P for heat-shrinking creates a smooth, steady, wide torch that ensures uniform heating and shrinkage of the treated piece.
The heat-shrinking nozzle Ø=25 mm is used for shrinking wrap-around repair sleeves and tubes with 3 mm wall thickness or less.