Minimum consignment of goods: pcs
Multiplicity of a consignment of goods: pcs
Select the quantity corresponding to the minimum batch or
←
CCD MTOK-G3/288-1KT3645-K Closure Kit
Part number:
130103-00912
Copyed at buffer
About this item (PDF)
The MTOK-G3 Dome Closure Kit is used for jointing overhead ADSS cable, «eight» type fiber optic cables with the external strength member, and urban cables of any design including corrugated steel tape armored cables. The MTOK-G3/288 Closure Kit, unlike the MTOK-G3/216 Closure Kit, is intended primarily to accommodate the maximum possible number of fusion splices. For this reason, the space for laying a transit cable buffer tube loop is not available. It is occupied by extra rows of fiber splice trays, and it is impossible to lay the transit cable loop.
The closure body and head are sealed mechanically. A rubber O-ring gasket and reinforced plastic clamp equipped with a self-tightening lock are used for sealing. When the clamp lock is opened, the latch transforms into a lever for easy removal of the clamp from the closure.
The incoming cables are sealed with heat shrink tubes. Initially all round cable ports on the closure head are blocked and have a gradient shape with different diameters. Cutting off the branch pipe in a certain place, you can choose the hole size as close as possible to the cable diameter. This eliminates an excessive stretching of the heat shrink tubes after shrinkage when inserting rather thin cables. All closure ports are also equipped with separate anchor nodes for cable central strength members.
The oval cable port of the closure can be used for either of the following cases: 1) insertion of four thin cables up to 10 mm OD or 2) insertion of two cables up to 25 mm OD. For the second case, it is required to use an extra item Closure Entry Sealing Kit No. 6 to ensure the sealing. This item can be purchased separately.
With the insertion of 2 thin cables in the round ports, the total number of cables inserted in the closure can reach 16 cables.
If the closure is mounted on a pole or wall, it is recommended to use the appropriate Closure Mount Bracket which can be purchased separately. Due to the bracket design, the closure can be easily removed from the pole and hung back. This operation requires no reattachment or use of any special tools, such as mounting band.