Minimum consignment of goods: pcs
Multiplicity of a consignment of goods: pcs
Select the quantity corresponding to the minimum batch or
←
CCD MTOK-V4/480-10K4845-K Closure Kit
Part number:
130103-00917
Copyed at buffer
About this item (PDF)
The MTOK-V4 Extended Dome Closure is used for jointing any fiber optic cable (except for submarine cables). This is achieved using cable entry kits that intended for each specific cable group. The MTOK-V4 Closure Kit, as well as the MTOK-V3/288 Closure Kit, is intended primarily to accommodate the maximum possible number of fusion splices. For this reason, the space for laying a transit cable buffer tube loop is not available. It is occupied by extra rows of fiber splice trays, and it is impossible to lay the transit cable loop.
The closure body and head are sealed mechanically. A rubber O-ring gasket and reinforced plastic clamp equipped with a self-tightening lock are used for sealing. When the clamp lock is opened, the latch transforms into a lever for easy removal of the clamp from the closure.
The cable insertion, central strength member fastening, and cable ports sealing are achieved using special cable entries. The cable entries must comply with the optical cable design. The use of special cable entries significantly increases the mechanical reliability of cable fastening in the closure.
The oval cable port of the closure can be used for either of the following cases: 1) insertion of four thin cables up to 10 mm OD or 2) insertion of two cables up to 25 mm OD. For the second case, based on the cable type, it is required to use an extra item MTOK#6 or #9 Closure Entry Sealing Kit to ensure the sealing. This item can be purchased separately.
The total number of cables inserted in the closure can reach up to 8 cables.