Minimum consignment of goods: pcs
Multiplicity of a consignment of goods: pcs
Select the quantity corresponding to the minimum batch or
←
CCD VOKS-FP-ST-O MODF Open Rack 600x600x2200 mm, Organizers Only
Part number:
131004-00274
Copyed at buffer
About this item (PDF)
The VOKS-FP-ST solution (fiber optic distribution system with front access and swiveling modules) is based on an open rack concept with the following dimensions: depth - 600 mm, width - 600 mm, height - 2200 mm.
The VOKS-FP-ST solution has the following functional sections: cable insertion, stripping and fastening section; installation and patching of fibers section; excess patch cords accommodation and storage section.
The cable entry zone is arranged in the upper or lower part of the rack with the use of VKR-3 breakout module and VKR carrier plate. The fiber installation and patching zone is mounted on the front part of rack frame. The section for accommodation and storage of excess patch cords is arranged on the right rear side of the rack frame; the organizers are also located there.
In this solution, fibers are installed and terminated in swiveling cross modules combined into cable blocks. Each module provides space for fiber optic storage and accommodation of up to 24 SC or DLC adapters. In the assembled configuration, the modules are installed in the cable block horizontally, while the front adapters are covered by the module face wall. The module swiveling provides easy access to adapters and pigtails. The module can be easily detached from the cable block for maintenance due to the excess length of fibers in the transition tubes. The VOKS-FP-ST rack can be equipped either with cable block for 6 swiveling cross modules for 144 SC ports or with the cable block for 4 swiveling cross modules for 96 SC ports. Totally, the VOKS-FP-ST rack can accommodate up to 9 cable blocks for 6 swiveling cross modules or 12 cable blocks for 4 swiveling cross modules.